What to Do If Your Huion Pen Display Shows A Black Screen or No Signal

Does your Huion Pen Display show a black screen or 'no signal' when you turn it on? Don't worry, this article will direct you on what to do when you encounter such issues.

 

Situation 1. Pen display shows a black screen.

The pen display indicator does not light up and the pen display shows a black screen. When you encounter such a situation, please check:

  1. Whether the power cable is damaged or not. If the power cable is damaged, please change to another power cable.
  2. Whether all the cables are properly connected or not. If all the cables are connected correctly but the pen display still shows a black screen, this issue may be caused by the improper handling during transportation, and thereby some components may have been damaged. Please contact our customer service for further assistance.

 

 

Situation 2. Pen display shows 'no signal'.

 

The Pen Display indicator is red and when you turn it on, it shows 'NO SIGNAL' or 'NO CABLE'. When you come across this issue, please check the following to fix it:

  1. Please note that if you are using a desktop computer and have a separate or dedicated graphics card, please connect the video signal cable to the location of the separate or dedicated graphics card.
  2. Unplug and re-plug the VGA/DVI/HDMI/ 3-in-1 cable.
  3. Please check if there is a problem with the computer signal interface by using another cable or interface.
  4. If there are no other interfaces or cables available, please try on another computer.
  5. If you have used an adapter to connect the cable, please try with another adapter.

 

If all the above mentioned methods cannot fix your issue, please contact our customer service for further assistance.